Conductivity and temperature transmitter
355,00 € excluding VAT
This device is an advanced conductivity and temperature transmitter for water treatment applications using WiFi communication for configuration. It has configurable analog outputs for conductivity and temperature measurement and it can be connected with sensors that have any types of cell constant.
The LSP-TCT-WIFI conductivity transmitter is designed to measure the conductivity, resistivity and temperature of the liquids with the corresponding sensor. This instrument is suitable for high-purity water monitoring and water treatment applications, such as reverse osmosis or ion exchanger. With its DIN rail mountable housing, it is easy to install into industrial environments. Configuration of the parameters can be easily done by accesing the device through its WiFi connection.
Features
• WiFi connection for configuration
• MODBUS
• Conductivity, resistivity and temperature measurement
• Configurable signal output for the conductivity (0 -20mA; 4-20mA; 0-24mA; 0-10V)
• Configurable signal output for the temperature (0 -20mA; 4-20mA; 0-24mA; 0-10V)
• Switching digital output Relay (Switching point is configurable through setup program)
• Cyclical self calibration
• Linear temperature compensation
• Electrically isolated input, output and supply
• DIN rail mounting
• Compensation of the cable capacity
• Calibration of the cell constant
On the video below it’s shown how to configure the device after the application wiring:
| Weight | 114 g |
|---|---|
| Dimensions | 99 × 114,5 × 22,5 mm |
| Supply voltage | 12 to 30 VDC |
| Power Consumption | <25mA |
| Over Voltage surge protection | 36V |
| Input 1 | Conductivity sensor |
| Input 2 | Pt100/Pt1000/NTC/PTC temperature sensor |
| Cell constants | 0.01; 0.1; 1; 10 |
| A/D converter | 16bit |
| Analog Output 1 Signal Type | 0-10V; 4-20mA; 0-20mA |
| Analog Output 2 Signal Type | 0-10V; 4-20mA; 0-20mA |
| Digital Output | 0.5A 24 VDC/AC Relay |
| Output accuracy 0 to 200uS/cm | +/-0.02 uS/cm |
| Output accuracy 0 to 2000uS/cm | +/-0.1 uS/cm |
| Output accuracy -20 to 100 °C | 0.5 °C |
| Response time | 0.8ms |
| Reverse-Polarity Protection | YES |
| IP Rating | IP20 |
| Mounting | TS-35 DIN |
1 review for Conductivity and temperature transmitter
Add a review
Related products
Transmitters
Products for automation
Gustavo Canal (verified owner) –
Excellent device at a great price. Very good precision in data acquisition. Easy to install and operate. Easy calibration.
We use it in reverse osmosis plants controlled by PLC in 4..20ma mode.
Not a minor detail, Levtech provides very good technical support.
Good work!
Diaverum Argentina SA.